Kompaktdichtung Typ 0820

Produktdokumentation

Dokument	Dateityp
Produktübersicht	Download

Größen anzeigen

Typ 0820 ist eine zweiteilige , doppelt wirkende Kolbendichtung , bestehend aus einem Profilring aus PTFE , sowie einem O-Ring als Vorspannelement.

Anwendung

Spritzgießmaschinen , Gabelstapler , Hebebühnen , Kräne , Landmaschinen , Armaturen in hydraulischen und pneumatischen Systemen.

Technische Informationen

Betrieb

Optionen

Tabellen

OPERATING CONDITIONS
MEDIA	Mineral oils (DIN 51524)	HFA and HFB	HFC
TEMPERATURE	from -30°C till +105°C	from +5°C till +60°C	from -30°C till +60°C
PRESSURE	max. 400 Bar	max. 400 Bar	max. 400 Bar
SPEED	max. 5.0 m/s	max. 5.0 m/s	max. 5.0 m/s
Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS	Ra	Rmax
Sliding Surface	max. 0.2 µm	2.0 µm
Groove Base	max. 1.6 µm	6.3 µm
Groove Flanks	max. 3.2 µm	15 µm
Note: It is recommended to have 50% to 90% of the working surface material contact area value.

PERMISSIBLE SEALING GAP
B (mm)	Smax (mm)
x	150 Bar	250 Bar	400 Bar
2.2	0.25	0.20	0.15
3.2	0.4	0.25	0.15
4.2	0.4	0.25	0.20
6.3	0.5	0.30	0.20
8.1	0.6	0.35	0.25
9.5	0.7	0.50	0.30
Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.

OPERATING CONDITIONS
MEDIA	Mineral oils (DIN 51524)	HFA and HFB	HFC
TEMPERATURE	from -30°C till +105°C	from +5°C till +60°C	from -30°C till +60°C
PRESSURE	max. 400 Bar	max. 400 Bar	max. 400 Bar
SPEED	max. 5.0 m/s	max. 5.0 m/s	max. 5.0 m/s
Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS	Ra	Rmax
Sliding Surface	max. 0.2 µm	2.0 µm
Groove Base	max. 1.6 µm	6.3 µm
Groove Flanks	max. 3.2 µm	15 µm
Note: It is recommended to have 50% to 90% of the working surface material contact area value.

PERMISSIBLE SEALING GAP
B (mm)	Smax (mm)
x	150 Bar	250 Bar	400 Bar
2.2	0.25	0.20	0.15
3.2	0.4	0.25	0.15
4.2	0.4	0.25	0.20
6.3	0.5	0.30	0.20
8.1	0.6	0.35	0.25
9.5	0.7	0.50	0.30
Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.

OPERATING CONDITIONS
MEDIA	Mineral oils (DIN 51524)	HFA and HFB	HFC
TEMPERATURE	from -30°C till +105°C	from +5°C till +60°C	from -30°C till +60°C
PRESSURE	max. 400 Bar	max. 400 Bar	max. 400 Bar
SPEED	max. 5.0 m/s	max. 5.0 m/s	max. 5.0 m/s
Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS	Ra	Rmax
Sliding Surface	max. 0.2 µm	2.0 µm
Groove Base	max. 1.6 µm	6.3 µm
Groove Flanks	max. 3.2 µm	15 µm
Note: It is recommended to have 50% to 90% of the working surface material contact area value.

PERMISSIBLE SEALING GAP
B (mm)	Smax (mm)
x	150 Bar	250 Bar	400 Bar
2.2	0.25	0.20	0.15
3.2	0.4	0.25	0.15
4.2	0.4	0.25	0.20
6.3	0.5	0.30	0.20
8.1	0.6	0.35	0.25
9.5	0.7	0.50	0.30
Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.

OPERATING CONDITIONS
MEDIA	Mineral oils (DIN 51524)	HFA and HFB	HFC
TEMPERATURE	from -30°C till +105°C	from +5°C till +60°C	from -30°C till +60°C
PRESSURE	max. 400 Bar	max. 400 Bar	max. 400 Bar
SPEED	max. 5.0 m/s	max. 5.0 m/s	max. 5.0 m/s
Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS	Ra	Rmax
Sliding Surface	max. 0.2 µm	2.0 µm
Groove Base	max. 1.6 µm	6.3 µm
Groove Flanks	max. 3.2 µm	15 µm
Note: It is recommended to have 50% to 90% of the working surface material contact area value.

PERMISSIBLE SEALING GAP
B (mm)	Smax (mm)
x	150 Bar	250 Bar	400 Bar
2.2	0.25	0.20	0.15
3.2	0.4	0.25	0.15
4.2	0.4	0.25	0.20
6.3	0.5	0.30	0.20
8.1	0.6	0.35	0.25
9.5	0.7	0.50	0.30
Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.

Bohrungsdurchmesser (mm)

Nutdurchmesser (mm)

Rillenbreite (mm)

Material Dichtung

Compound

Arbeitsweise: Doppeltwirkend

Max. Betriebsdruck (bar): 400

Material energizer

Max. Geschwindigkeit (m/s): 15

Temperaturbereich (°C)

Filter löschen (3 der 3 angezeigten Artikel)

Kolbendichtung 0820 PTFE ER39/NBR 290x269 L=8,1 Artikelnummer 13226521 Vergleichen Vergleichen	Bitte einloggen um Preise zu sehen	{"itemTrackPD":{ "item_name": "piston seal 0820 ptfe er39/nbr 290x269 l=8,1", "item_id": "g1579278045551472", "material_number": "13226521", "item_brand": "no brand", "item_category":"seals", "item_category2":"hydraulic and pneumatic gaskets", "item_category3":"piston seals", "item_category4": "pr_ec010609_0011", "item_variant": "pce", "index": "1", "quantity": "" } }
Kompaktdichtung Eriflon 39-0820 120x104,5 L=6,4 Artikelnummer 12493988 Katalog Artikelnr 1: RX820-120X104.5X6.4ER39N Vergleichen Vergleichen	Bitte einloggen um Preise zu sehen	{"itemTrackPD":{ "item_name": "compact seal eriflon 39-0820 120x104,5 l=6,4", "item_id": "gr551950838135", "material_number": "12493988", "item_brand": "no brand", "item_category":"seals", "item_category2":"hydraulic and pneumatic gaskets", "item_category3":"piston seals", "item_category4": "pr_ec010609_0011", "item_variant": "pce", "index": "2", "quantity": "" } }
Kompaktdichtung Eriflon 39-0820 80x64,5 L=6,3 Artikelnummer 11049872 Katalog Artikelnr 1: RX820-80X64.5X6.3ER39N; RX820-80X64.5X6.#001 Vergleichen Vergleichen	Bitte einloggen um Preise zu sehen	{"itemTrackPD":{ "item_name": "compact seal eriflon 39-0820 80x64,5 l=6,3", "item_id": "gr0000000351389", "material_number": "11049872", "item_brand": "no brand", "item_category":"seals", "item_category2":"hydraulic and pneumatic gaskets", "item_category3":"piston seals", "item_category4": "pr_ec010609_0011", "item_variant": "pce", "index": "3", "quantity": "" } }