Nutringmanschette Typ 0020

Dokument	Dateityp
Produktübersicht	Download

Typ 0020 ist eine einfach wirkende Stangendichtung.

Land- und Baumaschinen , Gabelstapler , Spritzgießmaschinen , Hebebühnen und Standardzylinder

OPERATING CONDITIONS
MEDIA	Mineral oils(DIN 51524)	HFA and HFB	HFC
TEMPERATURE	from -30°C till +100°C	from +5°C till +50°C	from -30°C till +40°C
PRESSURE	max. 400 Bar	max. 400 Bar	max. 400 Bar
SPEED	max. 0.5 m/s	max. 0.5 m/s	max. 0.5 m/s
Note: The above data are maximum values and cannot be used at the same time.

SURFACE ROUGHNESS	Ra	Rmax
Sliding Surface	max. 0.4 µm	max. 3.2 µm
Groove Base	max. 1.6 µm	max. 10 µm
Groove Flanks	max. 3.2 µm	max. 16 µm
Note: It is recommended to have 50% to 90% of the working surface material contact area value.

MINUMUM DIAMETER VALUES FOR CLOSED TYPE OF GROOVES
(D-d)/2 (mm)	4	5	6	7.7	10	12.5	15
dmin (mm)	25	30	40	50	80	100	105

PERMISSIBLE SEALING GAP
PU	Smax (mm)
t=(D-d)/2(mm)	150 Bar	250 Bar	400 Bar
t less/equal to 5	0.30	0.20	0.15
t above 5	0.35	0.25	0.20
Note: The largest sealing gap value occurring on the non-pressurized side of the seal does have a vital importance for the function of the seal and in this respect it is quite important to use the S value lower than the above indicated numbers.

Stangendurchmesser (mm)

Nutdurchmesser (mm)

Rillenbreite (mm)

Höhe der Abdichtung (mm)

Material Dichtung

Max. Betriebsdruck (bar): 400

Max. Geschwindigkeit (m/s): 0.5

Temperaturbereich (°C)

Filter löschen (5 der 5 angezeigten Artikel)